You are here

PC-150D Charger

Lead Acid Battery Charger

6 VDC, 12 VDC & 24 VDC; 0.2 Amps to 2.0 Amps

PC-150D Lead Acid Battery Charger, 6 VDC, 12 VDC & 24 VDC; 0.2 Amps to 2.0 Amps, DC Input

Applications

Charges lead acid batteries
Optimally designed for batteries up to 25 Ampere Hours
For use with intermittently used vehicle batteries

PC-150D Data Sheet

COTS Charger Information

Features

DC Input
Temperature compensation
Three stage charger
LED displays for charging status
Single battery charger
Unattended charging

Operatinal Characteristics

Three stages of operation
- Bulk charge mode – replaces 80% of the charge to the battery from a discharged state – 6 hour time limit
- Absorption mode – a tapering current replacing the final 20% of the charge to the battery – end current is a pre-programmed value
- Float mode – maintains the battery’s float voltage.

Model No	PC-150D
DC Input Range	11 to 15VDC
Battery Charge Voltage	6 VDC, 12 VDC & 24 VDC Nominal (factory set) (see data sheet for specific details)
Battery Charge Current	• 0.2 to 2.0 Amps at 6 VDC & 12 VDC (factory set) • 0.2 to 1.5 Amps at 24 VDC (factory set)
Charger Power Out	50 Watts max.
Charger Indicators	LED Indicators: • Solid green LED - No battery connected, charger on • Solid yellow LED – Charging • Solid green LED – Battery connected, float charge mode • Solid red LED – Battery VDC less than 5.0VDC or connected in reverse
Weight	1.7 lbs. (0.75 Kg)
Dimensions	5” x 3 1/2” x 2 1/2” H (13cm x 9cm x 6.5cm)
Mounting	4 each #6 screws
Recommended Battery Charging Temp	10°C to +27°C (50°F to +80°F)
Operating Temp	0° C to 50° C (32°F to 122°F)
Storage Temp	-40° C to +70° C (-40°F to +158°F)
Humidity	95% relative
Color	Black, annodized
Charger Housing	Extruded aluminum body, polycarbonate end caps
Harmonized Tariff Code	8504.40.9550

Flooded/wet lead acid batteries
Valve Regulated Lead Acid (VRLA) batteries
GEL lead acid batteries